Denial of Service Attacks against Hospitals and Emergency Rooms

One of the most frightening possibilities of cyber warfare is to use remotely deployed , or timed intrusion malware to disturb, distort, deny health care services.

Computer Virus Shuts Down Georgia Hospital

A doctor in an Emergency Room depends on critical information that may save lives if it is electronic and comes on time. However this electronic information can be distorted (which is more severe than deleting it)

The electronic system of a Hospital can also be overwhelmed. If there can be built Stuxnet worms on   nuclear centrifuge systems (like those by Siemens), then the widespread availability of health care systems means these can be reverse engineered for particularly vicious cyber worms.

An example of prime area for targeting is Veterans Administration for veterans of armed forces, but also cyber attacks against electronic health records.

Consider the following data points-

http://threatpost.com/en_us/blogs/dhs-warns-about-threat-mobile-devices-healthcare-051612

May 16, 2012, 9:03AM

DHS’s National Cybersecurity and Communications Integration Center (NCCIC) issued the unclassfied bulletin, “Attack Surface: Healthcare and Public Health Sector” on May 4. In it, DHS warns of a wide range of security risks, including that could expose patient data to malicious attackers, or make hospital networks and first responders subject to disruptive cyber attack

http://publicintelligence.net/nccic-medical-device-cyberattacks/

National Cybersecurity and Communications Integration Center Bulletin

The Healthcare and Public Health (HPH) sector is a multi-trillion dollar industry employing over 13 million personnel, including approximately five million first-responders with at least some emergency medical training, three million registered nurses, and more than 800,000 physicians.

(U) A significant portion of products used in patient care and management including diagnosis and treatment are Medical Devices (MD). These MDs are designed to monitor changes to a patient’s health and may be implanted or external. The Food and Drug Administration (FDA) regulates devices from design to sale and some aspects of the relationship between manufacturers and the MDs after sale. However, the FDA cannot regulate MD use or users, which includes how they are linked to or configured within networks. Typically, modern MDs are not designed to be accessed remotely; instead they are intended to be networked at their point of use. However, the flexibility and scalability of wireless networking makes wireless access a convenient option for organizations deploying MDs within their facilities. This robust sector has led the way with medical based technology options for both patient care and data handling.

(U) The expanded use of wireless technology on the enterprise network of medical facilities and the wireless utilization of MDs opens up both new opportunities and new vulnerabilities to patients and medical facilities. Since wireless MDs are now connected to Medical information technology (IT) networks, IT networks are now remotely accessible through the MD. This may be a desirable development, but the communications security of MDs to protect against theft of medical information and malicious intrusion is now becoming a major concern. In addition, many HPH organizations are leveraging mobile technologies to enhance operations. The storage capacity, fast computing speeds, ease of use, and portability render mobile devices an optimal solution.

(U) This Bulletin highlights how the portability and remote connectivity of MDs introduce additional risk into Medical IT networks and failure to implement a robust security program will impact the organization’s ability to protect patients and their medical information from intentional and unintentional loss or damage.

(U) According to Health and Human Services (HHS), a major concern to the Healthcare and Public Health (HPH) Sector is exploitation of potential vulnerabilities of medical devices on Medical IT networks (public, private and domestic). These vulnerabilities may result in possible risks to patient safety and theft or loss of medical information due to the inadequate incorporation of IT products, patient management products and medical devices onto Medical IT Networks. Misconfigured networks or poor security practices may increase the risk of compromised medical devices. HHS states there are four factors which further complicate security resilience within a medical organization.

1. (U) There are legacy medical devices deployed prior to enactment of the Medical Device Law in 1976, that are still in use today.

2. (U) Many newer devices have undergone rigorous FDA testing procedures and come equipped with design features which facilitate their safe incorporation onto Medical IT networks. However, these secure design features may not be implemented during the deployment phase due to complexity of the technology or the lack of knowledge about the capabilities. Because the technology is so new, there may not be an authoritative understanding of how to properly secure it, leaving open the possibilities for exploitation through zero-day vulnerabilities or insecure deployment configurations. In addition, new or robust features, such as custom applications, may also mean an increased amount of third party code development which may create vulnerabilities, if not evaluated properly. Prior to enactment of the law, the FDA required minimal testing before placing on the market. It is challenging to localize and mitigate threats within this group of legacy equipment.

3. (U) In an era of budgetary restraints, healthcare facilities frequently prioritize more traditional programs and operational considerations over network security.

4. (U) Because these medical devices may contain sensitive or privacy information, system owners may be reluctant to allow manufactures access for upgrades or updates. Failure to install updates lays a foundation for increasingly ineffective threat mitigation as time passes.

(U) Implantable Medical Devices (IMD): Some medical computing devices are designed to be implanted within the body to collect, store, analyze and then act on large amounts of information. These IMDs have incorporated network communications capabilities to increase their usefulness. Legacy implanted medical devices still in use today were manufactured when security was not yet a priority. Some of these devices have older proprietary operating systems that are not vulnerable to common malware and so are not supported by newer antivirus software. However, many are vulnerable to cyber attacks by a malicious actor who can take advantage of routine software update capabilities to gain access and, thereafter, manipulate the implant.

(U) During an August 2011 Black Hat conference, a security researcher demonstrated how an outside actor can shut off or alter the settings of an insulin pump without the user’s knowledge. The demonstration was given to show the audience that the pump’s cyber vulnerabilities could lead to severe consequences. The researcher that provided the demonstration is a diabetic and personally aware of the implications of this activity. The researcher also found that a malicious actor can eavesdrop on a continuous glucose monitor’s (CGM) transmission by using an oscilloscope, but device settings could not be reprogrammed. The researcher acknowledged that he was not able to completely assume remote control or modify the programming of the CGM, but he was able to disrupt and jam the device.

http://www.healthreformwatch.com/category/electronic-medical-records/

February 7, 2012

Since the data breach notification regulations by HHS went into effect in September 2009, 385 incidents affecting 500 or more individuals have been reported to HHS, according to its website.

http://www.darkdaily.com/cyber-attacks-against-internet-enabled-medical-devices-are-new-threat-to-clinical-pathology-laboratories-215#axzz1yPzItOFc

February 16 2011

One high-profile healthcare system that regularly experiences such attacks is the Veterans Administration (VA). For two years, the VA has been fighting a cyber battle against illegal and unwanted intrusions into their medical devices

 

http://www.mobiledia.com/news/120863.html

 DEC 16, 2011
Malware in a Georgia hospital’s computer system forced it to turn away patients, highlighting the problems and vulnerabilities of computerized systems.

The computer infection started to cause problems at the Gwinnett Medical Center last Wednesday and continued to spread, until the hospital was forced to send all non-emergency admissions to other hospitals.

More doctors and nurses than ever are using mobile devices in healthcare, and hospitals are making patient records computerized for easier, convenient access over piles of paperwork.

http://www.doctorsofusc.com/uscdocs/locations/lac-usc-medical-center

As one of the busiest public hospitals in the western United States, LAC+USC Medical Center records nearly 39,000 inpatient discharges, 150,000 emergency department visits, and 1 million ambulatory care visits each year.

http://www.healthreformwatch.com/category/electronic-medical-records/

If one jumbo jet crashed in the US each day for a week, we’d expect the FAA to shut down the industry until the problem was figured out. But in our health care system, roughly 250 people die each day due to preventable error

http://www.pcworld.com/article/142926/are_healthcare_organizations_under_cyberattack.html

Feb 28, 2008

“There is definitely an uptick in attacks,” says Dr. John Halamka, CIO at both Beth Israel Deaconess Medical Center and Harvard Medical School in the Boston area. “Privacy is the foundation of everything we do. We don’t want to be the TJX of healthcare.” TJX is the Framingham, Mass-based retailer which last year disclosed a massive data breach involving customer records.

Dr. Halamka, who this week announced a project in electronic health records as an online service to the 300 doctors in the Beth Israel Deaconess Physicians Organization,

Interview Markus Schmidberger ,Cloudnumbers.com

Here is an interview with Markus Schmidberger, Senior Community Manager for cloudnumbers.com. Cloudnumbers.com is the exciting new cloud startup for scientific computing. It basically enables transition to a R and other platforms in the cloud and makes it very easy and secure from the traditional desktop/server model of operation.

Ajay- Describe the startup story for setting up Cloudnumbers.com

Markus- In 2010 the company founders Erik Muttersbach (TU München), Markus Fensterer (TU München) and Moritz v. Petersdorff-Campen (WHU Vallendar) started with the development of the cloud computing environment. Continue reading “Interview Markus Schmidberger ,Cloudnumbers.com”

Use R for Business- Competition worth $ 20,000 #rstats

All you contest junkies, R lovers and general change the world people, here’s a new contest to use R in a business application

http://www.revolutionanalytics.com/news-events/news-room/2011/revolution-analytics-launches-applications-of-r-in-business-contest.php

REVOLUTION ANALYTICS LAUNCHES “APPLICATIONS OF R IN BUSINESS” CONTEST

$20,000 in Prizes for Users Solving Business Problems with R

 

PALO ALTO, Calif. – September 1, 2011 – Revolution Analytics, the leading commercial provider of R software, services and support, today announced the launch of its “Applications of R in Business” contest to demonstrate real-world uses of applying R to business problems. The competition is open to all R users worldwide and submissions will be accepted through October 31. The Grand Prize winner for the best application using R or Revolution R will receive $10,000.

The bonus-prize winner for the best application using features unique to Revolution R Enterprise – such as itsbig-data analytics capabilities or its Web Services API for R – will receive $5,000. A panel of independent judges drawn from the R and business community will select the grand and bonus prize winners. Revolution Analytics will present five honorable mention prize winners each with $1,000.

“We’ve designed this contest to highlight the most interesting use cases of applying R and Revolution R to solving key business problems, such as Big Data,” said Jeff Erhardt, COO of Revolution Analytics. “The ability to process higher-volume datasets will continue to be a critical need and we encourage the submission of applications using large datasets. Our goal is to grow the collection of online materials describing how to use R for business applications so our customers can better leverage Big Analytics to meet their analytical and organizational needs.”

To enter Revolution Analytics’ “Applications of R in Business” competition Continue reading “Use R for Business- Competition worth $ 20,000 #rstats”

Cloud Computing using Python

I liked the new features in PiCloud , which is a cloud computing way to use Python. Python is increasingly popular as a computational language, and the cloud is the way where HW is headed to atleast as of 2011-12

http://www.picloud.com/

The new features allows you to publish your own functions as urls.

 By publishing your Python functions to URLs. Why would you want to publish a function?

  • To call your Python functions from a programming language other than Python.
  • To use PiCloud from Google AppEngine, which does not support our native client library.
  • To easily setup a scalable RPC system.

Here’s a peek at the interface:

You publish a Python function

cloud.rest.publish(your_func, ‘myfunction’)

We give you a URL Back

https://api.picloud.com/r/2/myfunction/

You make an HTTP request using your method of choice to the URL

curl -k -u ‘key:secret_key’ https://api.picloud.com/r/2/myfunction/

It certainly is an interesting development and I am wondering how other languages can adopt this paradigm as well.
For R, as of now http://www.cloudnumbers.com/ seems to be the only player in the cloud.
It would be exciting to see more players in the cloud statistical analytical space.

 

Interview Eberhard Miethke and Dr. Mamdouh Refaat, Angoss Software

Here is an interview with Eberhard Miethke and Dr. Mamdouh Refaat, of Angoss Software. Angoss is a global leader in delivering business intelligence software and predictive analytics solutions that help businesses capitalize on their data by uncovering new opportunities to increase sales and profitability and to reduce risk.

Ajay-  Describe your personal journey in software. How can we guide young students to pursue more useful software development than just gaming applications.

 Mamdouh- I started using computers long time ago when they were programmed using punched cards! First in Fortran, then C, later C++, and then the rest. Computers and software were viewed as technical/engineering tools, and that’s why we can still see the heavy technical orientation of command languages such as Unix shells and even in the windows Command shell. However, with the introduction of database systems and Microsoft office apps, it was clear that business will be the primary user and field of application for software. My personal trip in software started with scientific applications, then business and database systems, and finally statistical software – which you can think of it as returning to the more scientific orientation. However, with the wide acceptance of businesses of the application of statistical methods in different fields such as marketing and risk management, it is a fast growing field that in need of a lot of innovation.

Ajay – Angoss makes multiple data mining and analytics products. could you please introduce us to your product portfolio and what specific data analytics need they serve.

a- Attached please find our main product flyers for KnowledgeSTUDIO and KnowledgeSEEKER. We have a 3rd product called “strategy builder” which is an add-on to the decision tree modules. This is also described in the flyer.

(see- Angoss Knowledge Studio Product Guide April2011  and http://www.scribd.com/doc/63176430/Angoss-Knowledge-Seeker-Product-Guide-April2011  )

Ajay-  The trend in analytics is for big data and cloud computing- with hadoop enabling processing of massive data sets on scalable infrastructure. What are your plans for cloud computing, tablet based as well as mobile based computing.

a- This is an area where the plan is still being figured out in all organizations. The current explosion of data collected from mobile phones, text messages, and social websites will need radically new applications that can utilize the data from these sources. Current applications are based on the relational database paradigm designed in the 70’s through the 90’s of the 20th century.

But data sources are generating data in volumes and formats that are challenging this paradigm and will need a set of new tools and possibly programming languages to fit these needs. The cloud computing, tablet based and mobile computing (which are the same thing in my opinion, just different sizes of the device) are also two technologies that have not been explored in analytics yet.

The approach taken so far by most companies, including Angoss, is to rely on new xml-based standards to represent data structures for the particular models. In this case, it is the PMML (predictive modelling mark-up language) standard, in order to allow the interoperability between analytics applications. Standardizing on the representation of models is viewed as the first step in order to allow the implementation of these models to emerging platforms, being that the cloud or mobile, or social networking websites.

The second challenge cited above is the rapidly increasing size of the data to be analyzed. Angoss has already identified this challenge early on and is currently offering in-database analytics drivers for several database engines: Netezza, Teradata and SQL Server.

These drivers allow our analytics products to translate their routines into efficient SQL-based scripts that run in the database engine to exploit its performance as well as the powerful hardware on which it runs. Thus, instead of copying the data to a staging format for analytics, these drivers allow the data to be analyzed “in-place” within the database without moving it.

Thus offering performance, security and integrity. The performance is improved because of the use of the well tuned database engines running on powerful hardware.

Extra security is achieved by not copying the data to other platforms, which could be less secure. And finally, the integrity of the results are vastly improved by making sure that the results are always obtained by analyzing the up-to-date data residing in the database rather than an older copy of the data which could be obsolete by the time the analysis is concluded.

Ajay- What are the principal competing products to your offerings, and what makes your products special or differentiated in value to them (for each customer segment).

a- There are two major players in today’s market that we usually encounter as competitors, they are: SAS and IBM.

SAS offers a data mining workbench in the form of SAS Enterprise Miner, which is closely tied to SAS data mining methodology known as SEMMA.

On the other hand, IBM has recently acquired SPSS, which offered its Clementine data mining software. IBM has now rebranded Clementine as IBM SPSS Modeller.

In comparison to these products, our KnowledgeSTUDIO and KnowledgeSEEKER offer three main advantages: ease of use; affordability; and ease of integration into existing BI environments.

Angoss products were designed to look-and-feel-like popular Microsoft office applications. This makes the learning curve indeed very steep. Typically, an intermediate level analyst needs only 2-3 days of training to become proficient in the use of the software with all its advanced features.

Another important feature of Angoss software products is their integration with SAS/base product, and SQL-based database engines. All predictive models generated by Angoss can be automatically translated to SAS and SQL scripts. This allows the generation of scoring code for these common platforms. While the software interface simplifies all the tasks to allow business users to take advantage of the value added by predictive models, the software includes advanced options to allow experienced statisticians to fine-tune their models by adjusting all model parameters as needed.

In addition, Angoss offers a unique product called StrategyBuilder, which allows the analyst to add key performance indicators (KPI’s) to predictive models. KPI’s such as profitability, market share, and loyalty are usually required to be calculated in conjunction with any sales and marketing campaign. Therefore, StrategyBuilder was designed to integrate such KPI’s with the results of a predictive model in order to render the appropriate treatment for each customer segment. These results are all integrated into a deployment strategy that can also be translated into an execution code in SQL or SAS.

The above competitive features offered by the software products of Angoss is behind its success in serving over 4000 users from over 500 clients worldwide.

Ajay -Describe a major case study where using Angoss software helped save a big amount of revenue/costs by innovative data mining.

a-Rogers Telecommunications Inc. is one of the largest Canadian telecommunications providers, serving over 8.5 million customers and a revenue of 11.1 Billion Canadian Dollars (2009). In 2008, Rogers engaged Angoss in order to help with the problem of ballooning accounts receivable for a period of 18 months.

The problem was approached by improving the efficiency of the call centre serving the collections process by a set of predictive models. The first set of models were designed to find accounts likely to default ahead of time in order to take preventative measures. A second set of models were designed to optimize the call centre resources to focus on delinquent accounts likely to pay back most of the outstanding balance. Accounts that were identified as not likely to pack quickly were good candidates for “Early-out” treatment, by forwarding them directly to collection agencies. Angoss hosted Rogers’ data and provided on a regular interval the lists of accounts for each treatment to be deployed by the call centre dialler. As a result of this Rogers estimated an improvement of 10% of the collected sums.

Biography-

Mamdouh has been active in consulting, research, and training in various areas of information technology and software development for the last 20 years. He has worked on numerous projects with major organizations in North America and Europe in the areas of data mining, business analytics, business analysis, and engineering analysis. He has held several consulting positions for solution providers including Predict AG in Basel, Switzerland, and as ANGOSS Corp. Mamdouh is the Director of Professional services for EMEA region of ANGOSS Software. Mamdouh received his PhD in engineering from the University of Toronto and his MBA from the University of Leeds, UK.

Mamdouh is the author of:

"Credit Risk Scorecards: Development and Implmentation using SAS"
 "Data Preparation for Data Mining Using SAS",
 (The Morgan Kaufmann Series in Data Management Systems) (Paperback)
 and co-author of
 "Data Mining: Know it all",Morgan Kaufmann



Eberhard Miethke  works as a senior sales executive for Angoss

 

About Angoss-

Angoss is a global leader in delivering business intelligence software and predictive analytics to businesses looking to improve performance across sales, marketing and risk. With a suite of desktop, client-server and in-database software products and Software-as-a-Service solutions, Angoss delivers powerful approaches to turn information into actionable business decisions and competitive advantage.

Angoss software products and solutions are user-friendly and agile, making predictive analytics accessible and easy to use.

Top 25 Errors in Programming that lead to hacker attacks

I am elaborating an earlier article on https://decisionstats.com/top-25-most-dangerous-software-errors/ based on my continued research into cyber conflict and strategy. My inputs are in italics – the rest is a condensed article for further thought.

This is thus a very useful initiative for the world to follow and upgrade their cyber security.

It is in accordance with the US policy to secure its cyber infrastructure (http://www.whitehouse.gov/the-press-office/remarks-president-securing-our-nations-cyber-infrastructure)  and countries like India, and even Europe as well as other nations could do well to atleast benchmark their own security practices in software and digital infrastructure with it. There seems to much better technical coordination between rogue hackers than patriotic hackers imho 😉


The Department of Homeland Security of the United States of America has just launched a list of top 25 errors in programming or creating software that increase vulnerability to hacking attacks. The list which is available at http://cwe.mitre.org/top25/index.html lists down a methodology fo measuring vulnerability called Common Weakness Scoring System (CWSS) and uses that score to rank the various errors as well as suggestions to eliminate these weaknesses or errors.
Measuring Weaknesses

The importance of a weakness (that arises due to software bugs) may vary depending on business usage or project implementation, the technologies , operating systems and computing environments in use, and the risk or threat perception.The Common Weakness Scoring System (CWSS) provides a mechanism for scoring weaknesses. and provides a framework for prioritizing security errors (“weaknesses”) that are discovered in software applications.
Identifying Weaknesses
For example the number 1 weakness is shown with
1CWE-89: Improper Neutralization of Special Elements used in an SQL Command (‘SQL Injection’).
The rest of the weaknesses are

RANK SCORE ID NAME
[1] 93.8 CWE-89 Improper Neutralization of Special Elements used in an SQL Command (‘SQL Injection’)
[2] 83.3 CWE-78 Improper Neutralization of Special Elements used in an OS Command (‘OS Command Injection’)
[3] 79.0 CWE-120 Buffer Copy without Checking Size of Input (‘Classic Buffer Overflow’)
[4] 77.7 CWE-79 Improper Neutralization of Input During Web Page Generation (‘Cross-site Scripting’)
[5] 76.9 CWE-306 Missing Authentication for Critical Function
[6] 76.8 CWE-862 Missing Authorization
[7] 75.0 CWE-798 Use of Hard-coded Credentials
[8] 75.0 CWE-311 Missing Encryption of Sensitive Data
[9] 74.0 CWE-434 Unrestricted Upload of File with Dangerous Type
[10] 73.8 CWE-807 Reliance on Untrusted Inputs in a Security Decision
[11] 73.1 CWE-250 Execution with Unnecessary Privileges
[12] 70.1 CWE-352 Cross-Site Request Forgery (CSRF)
[13] 69.3 CWE-22 Improper Limitation of a Pathname to a Restricted Directory (‘Path Traversal’)
[14] 68.5 CWE-494 Download of Code Without Integrity Check
[15] 67.8 CWE-863 Incorrect Authorization
[16] 66.0 CWE-829 Inclusion of Functionality from Untrusted Control Sphere
[17] 65.5 CWE-732 Incorrect Permission Assignment for Critical Resource
[18] 64.6 CWE-676 Use of Potentially Dangerous Function
[19] 64.1 CWE-327 Use of a Broken or Risky Cryptographic Algorithm
[20] 62.4 CWE-131 Incorrect Calculation of Buffer Size
[21] 61.5 CWE-307 Improper Restriction of Excessive Authentication Attempts
[22] 61.1 CWE-601 URL Redirection to Untrusted Site (‘Open Redirect’)
[23] 61.0 CWE-134 Uncontrolled Format String
[24] 60.3 CWE-190 Integer Overflow or Wraparound
[25] 59.9 CWE-759 Use of a One-Way Hash without a Salt
Details of each weakness is given by http://cwe.mitre.org/top25/index.html#Details
It includes Summary , Weakness Prevalence, Consequences, Remediation Cost, Ease of Detection ,Attacker Awareness and Attack Frequency .In addition the following sections describe each software vulnerability in detail- Technical Details ,Code Examples ,Detection Methods ,References,Prevention and Mitigation, Related CWEs and Related Attack Patterns.
Other important software weaknesses are –

[26] CWE-770: Allocation of Resources Without Limits or Throttling
[27] CWE-129: Improper Validation of Array Index
[28] CWE-754: Improper Check for Unusual or Exceptional Conditions
[29] CWE-805: Buffer Access with Incorrect Length Value
[30] CWE-838: Inappropriate Encoding for Output Context
[31] CWE-330: Use of Insufficiently Random Values
[32] CWE-822: Untrusted Pointer Dereference
[33] CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization (‘Race Condition’)
[34] CWE-212: Improper Cross-boundary Removal of Sensitive Data
[35] CWE-681: Incorrect Conversion between Numeric Types
[36] CWE-476: NULL Pointer Dereference
[37] CWE-841: Improper Enforcement of Behavioral Workflow
[38] CWE-772: Missing Release of Resource after Effective Lifetime
[39] CWE-209: Information Exposure Through an Error Message
[40] CWE-825: Expired Pointer Dereference
[41] CWE-456: Missing Initialization
Mitigating Weaknesses
Here is an example of the new matrix for migrations that also list the top 25 errors . This thus shows a way to fix the weaknesses and relative impact on each weakness by the following mitigations.
http://cwe.mitre.org/top25/mitigations.html#MitigationMatrix

Effectiveness ratings include:

  • High: The mitigation has well-known, well-understood strengths and limitations; there is good coverage with respect to variations of the weakness.
  • Moderate: The mitigation will prevent the weakness in multiple forms, but it does not have complete coverage of the weakness.
  • Limited: The mitigation may be useful in limited circumstances, only be applicable to a subset of this weakness type, require extensive training/customization, or give limited visibility.
  • Defense in Depth (DiD): The mitigation may not necessarily prevent the weakness, but it may help to minimize the potential impact when an attacker exploits the weakness.

Within the matrix, the following mitigations are identified:

 

  • M1: Establish and maintain control over all of your inputs.
  • M2: Establish and maintain control over all of your outputs.
  • M3: Lock down your environment.
  • M4: Assume that external components can be subverted, and your code can be read by anyone.
  • M5: Use industry-accepted security features instead of inventing your own.

The following general practices are omitted from the matrix:

  • GP1: Use libraries and frameworks that make it easier to avoid introducing weaknesses.
  • GP2: Integrate security into the entire software development lifecycle.
  • GP3: Use a broad mix of methods to comprehensively find and prevent weaknesses.
  • GP4: Allow locked-down clients to interact with your software.

 

M1 M2 M3 M4 M5 CWE
High DiD Mod CWE-22: Improper Limitation of a Pathname to a Restricted Directory (‘Path Traversal’)
Mod High DiD Ltd CWE-78: Improper Neutralization of Special Elements used in an OS Command (‘OS Command Injection’)
Mod High Ltd CWE-79: Improper Neutralization of Input During Web Page Generation (‘Cross-site Scripting’)
Mod High DiD Ltd CWE-89: Improper Neutralization of Special Elements used in an SQL Command (‘SQL Injection’)
Mod DiD Ltd CWE-120: Buffer Copy without Checking Size of Input (‘Classic Buffer Overflow’)
Mod DiD Ltd CWE-131: Incorrect Calculation of Buffer Size
High DiD Mod CWE-134: Uncontrolled Format String
Mod DiD Ltd CWE-190: Integer Overflow or Wraparound
High CWE-250: Execution with Unnecessary Privileges
Mod Mod CWE-306: Missing Authentication for Critical Function
Mod CWE-307: Improper Restriction of Excessive Authentication Attempts
DiD CWE-311: Missing Encryption of Sensitive Data
High CWE-327: Use of a Broken or Risky Cryptographic Algorithm
Ltd CWE-352: Cross-Site Request Forgery (CSRF)
Mod DiD Mod CWE-434: Unrestricted Upload of File with Dangerous Type
DiD CWE-494: Download of Code Without Integrity Check
Mod Mod Ltd CWE-601: URL Redirection to Untrusted Site (‘Open Redirect’)
Mod High DiD CWE-676: Use of Potentially Dangerous Function
Ltd DiD Mod CWE-732: Incorrect Permission Assignment for Critical Resource
High CWE-759: Use of a One-Way Hash without a Salt
DiD High Mod CWE-798: Use of Hard-coded Credentials
Mod DiD Mod Mod CWE-807: Reliance on Untrusted Inputs in a Security Decision
High High High CWE-829: Inclusion of Functionality from Untrusted Control Sphere
DiD Mod Mod CWE-862: Missing Authorization
DiD Mod CWE-863: Incorrect Authorization

Chrome

If you are new to using Chrome, there are many delightful features just beneath the surface.

If you are an Internet Explorer or Firefox or Safari or Arora or Opera or Sea Monkey browser user- this is one more reason to test, just test Chrome.

Ok so who Made chrome- (note the link i.e about:credits is what you type in chrome to see features)

about:credits

Credits

David M. Gay’s floating point routines
dynamic annotations
Netscape Portable Runtime (NSPR)
Network Security Services (NSS)
purify headers
google-glog’s symbolization library
valgrind
xdg-mime
xdg-user-dirs
google-jstemplateshow licensehomepage
Launchpad Translationsshow licensehomepage
Mozilla Personal Security Managershow licensehomepage
Google Toolbox for Macshow licensehomepage
ActiveX Scripting SDKshow licensehomepage
Almost Native Graphics Layer Engineshow licensehomepage
Apple sample codeshow licensehomepage
Google Cache Invalidation APIshow licensehomepage
Compact Language Detectionshow licensehomepage
OpenGL ES 2.0 Programming Guideshow licensehomepage
OpenGL ES 2.0 Conformance Testsshow licensehomepage
hunspell dictionariesshow licensehomepage
IAccessible2 COM interfaces for accessibilityshow licensehomepage
Chinese and Japanese Word Listshow licensehomepage
ISimpleDOM COM interfaces for accessibilityshow licensehomepage
modp base64 decodershow licensehomepage
NSBezierPath additions from Sean Patrick O’Brienshow licensehomepage
Cocoa extension code from Caminoshow licensehomepage
OTS (OpenType Sanitizer)show licensehomepage
Google Safe Browsingshow licensehomepage
XUL Runner SDKshow licensehomepage
and of course
so thats who made chrome.
  • Will Google be able to monetize Chrome the way it has monetized Android (Atleast by locking in both search,computing and browsing platforms)? I like the Adblock extension- and I would be happy to see more paid extensions. or even two versions one free and other freer (in choice) browsers for ads /security etc. maybe even a premium paid browser which has tor embedded in it , adblock enabled in it, and encrypted chat (like Waste Again) as an extension…. Hmm Hmm Hmm There is a SOCIAL version of Chromium called Rockmelt used ironically by Google Social Nemesis -Facebook (see http://blogs.ft.com/fttechhub/2011/06/facebook-partners-with-rockmelt-on-building-a-social-web-browser/)
  • Will Google share more revenue with open source contributors and thus create a new path in open source revenue generation just like it did with online advertising as an industry? Hmm Hmm Hmm. or Will Facebook continue to lead the way with extensions and applications (which did predate the mobile app place- so thats one innovation u gotta give to Zuk’s boys 😉
Back to Chrome-
To change settings- chrome://settings/browser
but to check what Autofill Data is stored within chrome (thats your credit card and your web form information)
chrome://settings/autofill and chrome://settings/content has all your content settings
Well Chrome is very very secure, or as secure as a browser can be in 2011.
You can set up Google Sync to keep all your data in the cloud, and it has an application specific password as well.
So hopefully you will have much more fun enjoying hacking Chromium 😉
See these